airplanearrow-downarrow-leftarrow-rightbrowsebucket-colorbutton-arrowbutton-backcircle-arrowclockcompassdiscountdownload-areadownload-file-greendownload-filedownloademailexternal-linkfaxfiltergridlogo-sanmarcomap-markermarker-buttonmarkermarkerspaint-jarprintprodotti-cercaprodotti-finitureprodotti-sistemireserved-arearetailersrollerroutesearchshareslider-arrow-leftslider-arrow-rightsocial-facebooksocial-googleplussocial-instagramsocial-linkedinsocial-pinterestsocial-twittersocial-youtubesocialtelephoneuserweb

series 467

1.2 MM ACRYLIC-SILOXANE ANTI-MOULD ANTI-ALGAE TEXTURED WALL COATING FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS

MARCOTHERM-SYL INTONACHINO, 1.2 mm acrylic-siloxane anti-mould anti-algae textured wall coating for external thermal insulation composite systems

Colour Chart: 336 esterni in tinta
Vai all'Area Colore

MARCOTHERM-SYL INTONACHINO is an outdoor wall coating, with an acrylic-siloxanic binder base, highly water repellent with a plaster compact finish effect. Creates a rough layer of considerable thickness, resistant to the aggressive action of atmospheric agents.
Thanks to its developed formulation it preserves the aesthetic appearance of the finish from mold and algae, even under unfavorable conditions such as particular wet and rainy areas, conspicuous presence of fungal spores and environmental exposures in general.
Its curved granules offers filling and masking powers that allow it to smooth an uneven support surface. Produces a finish very similar to that of mineral plasters, and may be applied wherever the support surface has aesthetic or absorption irregularities.


Download

  • Title Technical sheet
    Kind of file PDF
    Sizes 181.77 KB
    Download
  • Title Safety Data Sheet
    Kind of file PDF
    Sizes 91.66 KB
    Download
  • Title Environmental Data Sheet
    Kind of file PDF
    Sizes 338.95 KB
    Download
  • Title EPD Certificate
    Kind of file PDF
    Sizes 84.77 KB
    Download

Features

  • Equipment Equipment
    plastic of stainless steel trowel
  • Spreading capacity Spreading capacity
    1,8-2 kg/m²
  • Layers Layers
    1
  • Thinning for square trowel application Thinning for square trowel application
    ready to use
  • Marcromie Marcromie
    Tinting System Marcromie
  • Life Cycle Assessment Life Cycle Assessment
    Life Cycle Assessment
  • Resistant to moulds and algae in compliance with UNI EN 15457:2008 and UNI EN 15458:2008 Resistant to moulds and algae in compliance with UNI EN 15457:2008 and UNI EN 15458:2008
    Resistant to mold and alghae UNI EN 15457:2008 and UNI EN 15458:2008
  • UNI EN 15824-3 labelling UNI EN 15824-3 labelling
    Marking according to the standard UNI EN 15824


Videos

Request information